KIP WORM MOTOR

Gearbox> Worm Reducer and Worm Motor

11.Accessories for The Mounting

1.Features of the EG Worm Reducer 2.Designation and Location of Input Shaft
	2-1)Designation 2-2)Transmission Ratio 2-3)Symbols of Designatio n
3. Selection
	3-1) How to Select Proper Worm gear moto r 3-2) Other Consideration for Selection 3-3) Standard Specification of Motor 3-4) Data table of Reducer Selection
4. Convenient Technical Formulas
5. Service Factor
6.Over Hung Load
7.Backlash and Installation
8.Lubrication and Maintenance
9.Nominal Transmission Ratio,Power and Torque
10.Designs,Dimensions and Mounting Position
11.Accessories for The Mounting
	11-1) Foot Plate and Vertical Flange 11-2) Torque Arm
12. Table of Bearing and Oil Seal
13. Designs and Dimensions of Motor
14.Example of Mounting
15.Drawing Room

11-2)Torque Arm

SIZE	DIMENSIONS(mm)
SIZE	A	C	d₁	E	F	G	H
50	1251	6	25	100	45	74	10
60	150	6	25	115	65	90	10
70	175	8	25	135	85	110	10
80	200	8	25	150	90	120	12

SIZE	DIMENSIONS(mm)
SIZE	A	B	C	d₁	D	E	F	G	H
100	250	42	10	25	65	200	120	160	12
120	300	42	12	25	65	230	155	195	14
135	335	55	14	40	95	255	175	215	14
155	380	55	14	40	95	300	210	250	14
175	430	55	14	40	95	340	220	280	14
200	500	65	15	40	105	390	270	330	18
225	560	65	15	40	105	440	315	375	18
250	625	65	15	40	105	490	350	410	18

Copyright(c) 1998, EG Gear Drives. All rights reserved.

For Information, E-mail:kipdrive@gear.co.kr